Mailing List lml@lancaironline.net Message #34364
From: Tom Gourley <tom.gourley@verizon.net>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: Antenna Lead
Date: Mon, 06 Feb 2006 09:13:25 -0500
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
That depends.  If you use crimp type BNC connectors RG58 takes a slightly
different connector than RG142B or RG400.  RG142B and RG400 use the same
connector.  If you use the clamp type connector assembly, which requires
soldering the center conductor, the same connector fits all three.

Tom Gourley

----- Original Message -----
From: "Christopher Zavatson" <Christopher.Zavatson@baesystems.com>
To: "Lancair Mailing List" <lml@lancaironline.net>
Sent: Sunday, February 05, 2006 9:06 PM
Subject: [LML] Re: Antenna Lead


Do RG58 and RG400 use the same connectors?

Chris Zavatson
N91CZ
360std
www.N91CZ.com



--
For archives and unsub http://mail.lancaironline.net/lists/lml/
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster