I think we need to define "Stall Strips".  My definition of a Stall
Strip is a V shaped addition on the leading edge of a wing that causes
the inboard section to stall sooner than it normally would.  The purpose
being to provide earlier warning before stall occurs.

The installation that Dean Edson has is a Turbulator Kit (small vertical
fins attached aft of the leading edge) that keeps flow attached to the
wing.  Dean says they dramatically lowered his stall speed.

Steve Colwell (in Dean's EAA Chapter)


Posted for "N320GG" <n320g@hotmail.com>:

I received the following note from Dean Edson when I inquired about
stall strips (Gary Melton LNC2 N320GG):

21102 Bayou Dr
Bend Or 97702
541-388-9902
www.pnwaero.com

As I mentioned at the Chapter meeting last Wednesday, installation was
straight forward and the results amazing. As I recall the cost was in
the $350 range. I have their demo video (VHS) which you are welcome to
have.

Good Luck,
Dean

--
For archives and unsub http://lancaironline.net/lists/lml/