|
|
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
<< Lancair Builders' Mail List >>
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
Place the baluns over the outer insulator. Like ----|-|-|-- (if that crude
graphic makes any sense). Just slip 2 or 3 of them over the outer insulator
and use some heat shrink to hold them in place. Place them close to the
antenna side of the cable a couple inches from where the coax connects to
the antenna.
Curtis Krouse
I have misplaced my antenna/electrical book. Can anyone tell me how the
ferrite baluns are installed on the coax? (RG 400). As you know they have
a
yellow and a blue side. Nor do I remember how many per cable are used and
if on both ends or not.
Thanks,
Walter Dodson IV-P 70% struggling with all those darn wires...
LML website: http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore: http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.
Please send your photos and drawings to marvkaye@olsusa.com.
|
|