Return-Path: Sender: (Marvin Kaye) To: lml Date: Sat, 16 Aug 2003 13:37:35 -0400 Message-ID: X-Original-Return-Path: Received: from [216.229.64.74] (HELO mail.fidnet.com) by logan.com (CommuniGate Pro SMTP 4.1.1) with SMTP id 2530435 for lml@lancaironline.net; Sat, 16 Aug 2003 12:26:49 -0400 Received: (qmail 4149 invoked from network); 16 Aug 2003 16:26:34 -0000 Received: from 216-229-95-162-empty.fidnet.com (HELO shannon) (216.229.95.162) by four.fidnet.com with SMTP; 16 Aug 2003 16:26:34 -0000 Reply-To: From: "Shannon Knoepflein" X-Original-To: "'Lancair Mailing List'" Subject: RE: [LML] Re: Legacy Antenna Installations X-Original-Date: Sat, 16 Aug 2003 12:24:19 -0400 Organization: ISC X-Original-Message-ID: <002001c36412$d87b8b30$0700a8c0@shannon> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0021_01C363F1.5169EB30" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2627 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-Reply-To: Importance: Normal This is a multi-part message in MIME format. ------=_NextPart_000_0021_01C363F1.5169EB30 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Guys, I used a spray on material that Ryan suggested for my antenna groundplanes. I think it is called Electrodag, and it is available for purchase through KCI after I set that up for them. I use it for all my antennas, and have had great results. It is under my tcad antennas, stormscope, diplexed comm. (which actually works great, for me anyway.I know Rob had problems, but I have had none), and transponder. All work great. I highly suggest it. Its so easy to do, just paint it on under the final primer/sealer. If anyone has any questions, don't hesitate to ask. I was leary to suggest it before, but I see great results from it. --- Shannon Knoepflein <---> kycshann@kyol.net -----Original Message----- From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Don Barnes Sent: Saturday, August 16, 2003 11:18 AM To: Lancair Mailing List Subject: [LML] Re: Legacy Antenna Installations Rob, Great tip on the ground plane. Do you have a picture of the installation? Thank you for the link too. Don Barnes Legacy 198 I used 4 CU welding rods and just cut to length with a SWR meter... and yes, you can hear the difference, its worth the effort. http://www.qsl.net/wrav/2mground.htm ------=_NextPart_000_0021_01C363F1.5169EB30 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable

Guys,

 

I used a spray on material that = Ryan suggested for my antenna groundplanes.  I think it is called Electrodag, and it is available for purchase through KCI after I set that up for = them.  I use it for all my antennas, = and have had great results.  It is = under my tcad antennas, stormscope, diplexed comm. (which actually works great, for me = anyway…I know Rob had problems, but I have had none), and transponder.  All work great.  I highly suggest it.  Its = so easy to do, just paint it on under the final primer/sealer.  If anyone has any questions, = don’t hesitate to ask.  I was = leary to suggest it before, but I see great = results from it.

 

---

Shannon Knoepflein   <--->   = kycshann@kyol.net

-----Original = Message-----
From: Lancair Mailing = List [mailto:lml@lancaironline.net] On = Behalf Of Don Barnes
Sent: Saturday, August = 16, 2003 11:18 AM
To: Lancair Mailing = List
Subject: [LML] Re: Legacy = Antenna Installations

 

Rob,

Great tip on the ground plane. Do you have a = picture of the installation? Thank you for the link too. =

Don Barnes
Legacy 198

I used 4 CU welding rods = and just cut to length with
a SWR meter... and yes, you can = hear the difference,
its worth the effort. =

http://www.qsl.net/wrav/2mg= round.htm

------=_NextPart_000_0021_01C363F1.5169EB30--