From:  "Randy Snarr" <randy@telamerica.com>

 Mario,
  
 Use bondo or micro to "glue" the thing in the cradle where you need it.
 Once you do that, fininsh building the interior of the wing and close it out let  cure out and it will keep the new shape.
 The bondo or micro is easily sanded off the wing after you break them apart.
  
 This will work if you can get the thing straight with the bonds you have done so far.
 If you can not get it straight with pressure, weights and gluing it to the cradle with  bondo you will probably have to break some bonds
 or portion of a joint and then realign and rebond it together.
  
 Hope that helps.
  
 Randy L. Snarr
 235/320 75%
--