Return-Path: Received: from [65.173.216.71] (HELO mtasmtp1-clev.cle.ms.philips.com) by logan.com (CommuniGate Pro SMTP 4.1.1) with ESMTP id 2523172 for lml@lancair.net; Thu, 14 Aug 2003 14:59:17 -0400 Received: from picker.com ([149.59.192.105]) by mtasmtp1-clev.cle.ms.philips.com (Lotus Domino Release 5.0.11) with SMTP id 2003081414560751:33977 ; Thu, 14 Aug 2003 14:56:07 -0400 Received: from [144.54.52.3] (HELO Philips.com) by picker.com (CommuniGate Pro SMTP 3.3b1) with ESMTP id 16471428 for lml@lancair.net; Thu, 14 Aug 2003 14:59:11 -0400 Sender: rob Message-ID: <3F3BDBC3.876658AB@Philips.com> Date: Thu, 14 Aug 2003 14:58:11 -0400 From: Rob Logan Reply-To: Rob@Logan.com X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.5.1 sun4u) X-Accept-Language: en, pdf MIME-Version: 1.0 To: lml@lancair.net Subject: Re: LNC2 Wing washout problem References: X-MIMETrack: Itemize by SMTP Server on mtasmtp1-clev/P/SERVER/PHILIPS-CLE(Release 5.0.11 |July 24, 2002) at 08/14/2003 02:56:07 PM, Serialize by Router on mtasmtp1-clev/P/SERVER/PHILIPS-CLE(Release 5.0.11 |July 24, 2002) at 08/14/2003 02:56:12 PM, Serialize complete at 08/14/2003 02:56:12 PM Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=us-ascii From: "Randy Snarr" Mario, Use bondo or micro to "glue" the thing in the cradle where you need it. Once you do that, fininsh building the interior of the wing and close it out let cure out and it will keep the new shape. The bondo or micro is easily sanded off the wing after you break them apart. This will work if you can get the thing straight with the bonds you have done so far. If you can not get it straight with pressure, weights and gluing it to the cradle with bondo you will probably have to break some bonds or portion of a joint and then realign and rebond it together. Hope that helps. Randy L. Snarr 235/320 75% --