Message-ID: <000b01c18de1$fb538f80$1e0eb43f@f3g6s4>
Reply-To: "Dan Schaefer" <dfs155@earthlink.net>
Reply-To: lancair.list@olsusa.com
From: "Dan Schaefer" <dfs155@earthlink.net>
To: "Lancair list" <lancair.list@olsusa.com>
Subject: Garage heat
Date: Tue, 25 Dec 2001 23:50:24 -0800
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Rob:

Regarding garage heat, I just had an "Enerco" thermostatically controlled
gas heater installed in my shop/garage here in the cold country (Coeur
d'Alene, Idaho) rated at about 35-40,000 BTU and it does the job nicely.
Area heated is approx. equivalent to two and a half standard garages.
Requires only a small external vent or other source of fresh air. The burner
requires no venting according to code and is listed as an Infra-red heater
(whatever that means, since all heat is a form of infra-red radiation). Just
to be safe, I installed a CO detector in the shop ceiling and it hasn't
sounded off yet. Only draw-back I can think of is the fact that it uses a
pilot light, so I'm always burning a little bit of gas. Cost, if I remember,
was around $450, installed.

Cheers,

Dan Schaefer

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>