<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Joe: If you already have the Microstop basic tool, ACS lists the various
pilots and cutters that should fit it. Buying just the pilot and cutter, as
needed, isn't all that costly.

ACS lists quite a few variations, so you need to know which unit you have.
the Microstop tool does look kinda large, but should allow installation of
the applicable 100 degree cutter and associated pilot.

ACS also lists 120 degree cutters, so heads up!

Dan Schaefer

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>