Return-Path: <lancair.list-request@olsusa.com>
Received: from dskfw1.funb.com ([168.175.254.61]) by ns1.olsusa.com
          (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35)
          with ESMTP id com for <lancair.list@olsusa.com>;
          Mon, 18 Dec 2000 10:54:52 -0500
Received: (from uucp@localhost) by dskfw1.funb.com (8.8.5/8.8.5) id LAA25419 for <lancair.list@olsusa.com>; Mon, 18 Dec 2000 11:02:52 -0500 (EST)
Received: from clt-msw-01.funb.com(168.175.76.103) by dskfw1.funb.com via smap (V2.0)
	id xma025220; Mon, 18 Dec 00 11:02:20 -0500
Received: from cltastr02.capmark.funb.com (unverified) by clt-msw-01.capmark.funb.com
 (Content Technologies SMTPRS 4.1.5) with ESMTP id <Ta8af4c67508e55204f@clt-msw-01.capmark.funb.com> for <lancair.list@olsusa.com>;
 Mon, 18 Dec 2000 11:02:07 -0500
Received: from clt-conn-01.capmark.funb.com (unverified) by cltastr02.capmark.funb.com
 (Content Technologies SMTPRS 2.0.15) with ESMTP id <B0002156106@cltastr02.capmark.funb.com> for <lancair.list@olsusa.com>;
 Mon, 18 Dec 2000 11:04:10 -0500
Received: by clt-conn-01.capmark.funb.com with Internet Mail Service (5.5.2650.21)
	id <YY0VZ6NK>; Mon, 18 Dec 2000 11:01:06 -0500
Message-Id: <CA33F0348ED9D21187CF0008C7CF284C02AA61E2@clt-exch-05.capmark.funb.com>
From: "Hapgood, Matt" <matt.hapgood@funb.com>
To: "'lancair.list@olsusa.com'" <lancair.list@olsusa.com>
Subject: Cowl pressure for 360's
Date: Mon, 18 Dec 2000 11:00:53 -0500
X-Mailing-List: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
First Union Securities, Inc.

Given my unusual engine set-up and the likelihood that I am going to
experience oil temperature problems - I am trying to locate a pressure
diagram, or at least some solid discussions about where high and low
pressure is on a 360 cowl.

My dilemma is that I have a high mounted intercooler and a high mounted oil
cooler.  They are mounted high in the rear of the engine area because that
was the only place to put them - the intake runners, the exhaust that runs
rearward at the lower part of the cylinders, the wastegates and the turbo -
all this stuff eliminates mounting the cooler or the ducting to the cooler
anywhere below the "joggle" on the 360 cowl.  

Any ideas?

Thanks,

Matt
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>