From: RWolf99@aol.com
Message-ID: <98.de31f43.276a6996@aol.com>
Date: Thu, 14 Dec 2000 13:21:10 EST
Subject: Oil temperatures
To: Lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
A video was included in the box with the IO-360 that Lycoming just sent me.  
In this video, Ben Visser from Shell Oil had an interesting comment.  He said 
that oil temperatures at some point within the engine reach about 50 degrees 
higher than shown on the gauge.  Since our objective is to keep the oil warm 
enough to boil off the condensed water, but not much hotter, then 180 degrees 
on the gauge is what we shoot for.  180F + 50 = 230F, and boiling is at 212F, 
so I guess that gives us an 18 degree F margin for gauge error and sufficient 
dwell time at greater than 212F to get the boiling done.

Can you test a vernitherm in boiling water the way you can test a car 
thermostat?

- Rob Wolf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>