Return-Path: <lancair.list-request@olsusa.com>
Received: from imo-r01.mx.aol.com ([152.163.225.1]) by ns1.olsusa.com
          (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35)
          with ESMTP id com for <lancair.list@olsusa.com>;
          Wed, 11 Oct 2000 09:06:07 -0400
Received: from Sky2high@aol.com
	by imo-r01.mx.aol.com (mail_out_v28.26.) id k.61.7e2ac91 (3982)
	 for <lancair.list@olsusa.com>; Wed, 11 Oct 2000 09:12:59 -0400 (EDT)
From: Sky2high@aol.com
Message-ID: <61.7e2ac91.2715c15a@aol.com>
Date: Wed, 11 Oct 2000 09:12:58 EDT
Subject: Building a Legacy?
To: lancair.list@olsusa.com
X-Mailing-List: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Patience grasshopper, patience.

Kit # 2 reporting in:

<How did the one week factory workshop work out?> 

I did mine the week ending with the Labor day flyin and during Lancair's 
preparation for Reno.  It was a busy week, however, my objectives were met.  
After observing the state of the kit at Oshkosh, I was convinced that it 
would take me longer to build the wing and stabilizer/elevator jigs than just 
going to Redmond and closing them there.
 
<Any surprises with the kit components, parts fits or workmanship?>

The quality of the moldings and work done by Lancair is excellent.  Remember 
that the wings and belly are laid up as one part, placed in a jig and the 
spars and ribs are installed on top.  Access doors are built, hard points 
built, hardware installed, antenna installed and the fuel sealer applied.  In 
order to ship these parts, the wing skin is then cut from the belly pan and 
the spars are unbolted.  Major parts fit together because they were built 
together. Beautiful!


<What was accomplished during the stay?>

I had chosen the speed brake option, so much of the time was spent installing 
the pockets in the "wet" area of the wing.  After that, it took about 1.5 
days to close the wings and a similar (but overlapped) time to close the 
horizontal stabilizer and elevator.  Time was spent making and fitting the 
elevator counterweights which should not have to be done in future sessions.  
Of course, I learned some new tricks from Lancair's experienced staff, 
including using a flat sheet of 3 or 4 bid to mount 28 nutplates (for the 
speed brakes) with oversized bolt-holes.  These were cut out in rectangles, 
bolts were waxed and each nutplate assembly was floxed in place and held by 
the waxed bolt -- very fast, requires less precision and looks neater from 
the outside.  The trip was worthwhile -- go if you can.

<Are additional operations in the works (canopy, cockpit, etc.)?>

Don't Know.

<What have you done since you got it home?>

"It" will be dropped off on Tuesday, 17 October by Tom Murray as he is also 
transporting his Kit #5 to Michigan.  While waiting, I sold the Skymaster and 
am converting that part of the hangar to a workshop.

Scott Krueger
92EX, Lancair 320
209LL or 9ZP (haven't decided yet), Lancair Legacy #2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>