Message-ID: <000f01c00e6d$aa84d4f0$02649384@svr>
From: "Merrill Smith" <ksys@wwisp.com>
To: <coy0te@earthlink.net>
Cc: "lancair list" <lancair.list@olsusa.com>
Subject: uneven lndg gear when "up"
Date: Fri, 25 Aug 2000 03:22:53 -0500
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Walter,

My IV-P kit was delivered in 1995 so there may be some differences between
our respective kits.  Like you, I had wheel to door cutout problems.  I
asked the factory rep about juggling the axle spacers.  His reply was that
the spacers could be reconfigured as necessary to get sufficient clearance.
In my case the net result was that spacer thickness was decreased.  Between
that and having had the factory cut shims to adjust toe-in, track is fine
and tire wear is minimal.

I would suggest that you check with Don Goetz at the factory.  In my view
he's the last word on the IV.

Merrill Smith N335DF


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>