|
|
Yes, it has to protrude out about 3/16" on average. I had this exact problem with my RV. I decided I wanted a nice flush look and my airspeed were very inaccurate until it was discovered that they needed to come out of the boundary layer. --
Paul Besing
"Flying releases the mind from the tyranny of petty things"
On Jan 22, 2013, at 1:25 AM, Dan Ballin <dballin@gmail.com> wrote:
Needs to protrude a little for paint/body work and then there is an
argument to have them stick out slight more to get out of the boundary
layer. Others can comment on that, but I would recommend using the
Evo static ports. KCI part number KA0075. Way nicer and have a
standard NPT thread so easier to install and you can install it after
paint.
Dan
N386DM LEG2
On Mon, Jan 21, 2013 at 11:47 AM, Jeffrey W. Skiba <jskiba@icosa.net> wrote:
on page Chapter 24 REV. 0/02-15-02 of the Legacy RG construction manual,
gives directions for the static ports, however it does not state if they
should be flush with the skin or slightly protrude ? if they need to stick
out Is there a max and a min suggested ?
Thanks
Jeff.
<Screen Shot 2013-01-21 at 11.57.56 AM.png>--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
|
|