Mailing List lml@lancaironline.net Message #63968
From: Paul Miller <pjdmiller@gmail.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Prop cowling gap
Date: Mon, 14 Jan 2013 13:36:23 -0500
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
John, I have about 0.20 inch clearance on Legacy.   If I pull power back at cruise speed it will rub on the cowl so that is too tight.   One data point, hope that helps.

Paul 
Legacy
On 2013-01-14, at 8:52 AM, "John F. Herminghaus" <catignano@teletu.it> wrote:

How large should the gap between the prop spinner and the cowling be on a IVP?

Thanks in advance.

John Herminghaus
I-VVVV

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster