Oops, it looks like my switch (below in prior post) is Not on the TCW site anymore (I only found the new 2-part model).
This is the model that I have:
Works great, but obviously you need to watch the current load.
>>>>Hi Charlie
This is what I use below for my gear safety ("squat") switch). The AS-1 for $45. It looks like a minature plastic microswitch (about 2"x1x1/2") Small and light. I also use another one to operate the TCW two speed safety trim module.
I would guess that the deadband (range between open & closing) is about 10kts or so, which isn't bad. Works great, and I've not had any issues with these switches over about 500hrs.
http://www.tcwtech.com/index.htm
<<<
|