X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Fri, 20 Jul 2012 09:29:15 -0400 Message-ID: X-Original-Return-Path: Received: from mail-pb0-f52.google.com ([209.85.160.52] verified) by logan.com (CommuniGate Pro SMTP 5.4.6) with ESMTPS id 5659965 for lml@lancaironline.net; Thu, 19 Jul 2012 16:57:26 -0400 Received-SPF: pass receiver=logan.com; client-ip=209.85.160.52; envelope-from=billhogarty@gmail.com Received: by pbbro8 with SMTP id ro8so5135857pbb.25 for ; Thu, 19 Jul 2012 13:56:50 -0700 (PDT) Received: by 10.68.221.70 with SMTP id qc6mr8322374pbc.92.1342731409758; Thu, 19 Jul 2012 13:56:49 -0700 (PDT) X-Original-Return-Path: Received: from [10.211.130.138] (gsrbluesocket.smartcity.com. [208.115.91.226]) by mx.google.com with ESMTPS id mr1sm2430885pbb.62.2012.07.19.13.56.48 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 19 Jul 2012 13:56:48 -0700 (PDT) References: In-Reply-To: Mime-Version: 1.0 (1.0) Content-Transfer-Encoding: 7bit Content-Type: multipart/alternative; boundary=Apple-Mail-650A641C-2E22-4B49-8152-EC631F1E4E2A X-Original-Message-Id: <7B33FAB4-D951-47A5-A9F5-E98CAE555D3D@gmail.com> X-Original-Cc: "lml@lancaironline.net" X-Mailer: iPad Mail (9B206) From: Bill Hogarty Subject: Re: [LML] Re: Glue for canopy seal. X-Original-Date: Thu, 19 Jul 2012 13:56:52 -0700 X-Original-To: Lancair Mailing List --Apple-Mail-650A641C-2E22-4B49-8152-EC631F1E4E2A Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=us-ascii DRAT....I also had to learn that lesson the hard way. I made the hole large= r, then added a=20 Bushing to prevent abrasion Regards, Bill H. On Jul 19, 2012, at 1:44 PM, Gary Weeks wrote: > Thanks Steve, >=20 > Yes I have made that hole big enough so that that tube wont be touching wh= en the canopy seal is glued into position.=20 >=20 > I did this prior to sending it to the paint shop which is where it is now.= >=20 > Many Thanks >=20 > Gary Weeks >=20 > http://legacy550.wordpress.com/=20 >=20 >=20 >=20 > On Thu, Jul 19, 2012 at 6:47 AM, Steve Colwell wrot= e: > Gary, >=20 > =20 >=20 > I have had intermittent problems with my canopy seal inflating. I think t= he problem is I did not make the hole under the inflation inlet large enough= to recess it. Just thought I would pass that along.=20 >=20 > =20 >=20 > Steve Colwell Legacy >=20 >=20 --Apple-Mail-650A641C-2E22-4B49-8152-EC631F1E4E2A Content-Transfer-Encoding: 7bit Content-Type: text/html; charset=utf-8
DRAT....I also had to learn that lesson the hard way.  I made the hole larger, then added a 
Bushing to prevent abrasion

Regards, Bill H.




On Jul 19, 2012, at 1:44 PM, Gary Weeks <g.weeks550@gmail.com> wrote:

Thanks Steve,

Yes I have made that hole big enough so that that tube wont be touching when the canopy seal is glued into position. 

I did this prior to sending it to the paint shop which is where it is now.

Many Thanks

Gary Weeks




On Thu, Jul 19, 2012 at 6:47 AM, Steve Colwell <mcmess1919@yahoo.com> wrote:

Gary,

 

I have had intermittent problems with my canopy seal inflating.  I think the problem is I did not make the hole under the inflation inlet large enough to recess it.  Just thought I would pass that along. 

 

Steve Colwell   Legacy


--Apple-Mail-650A641C-2E22-4B49-8152-EC631F1E4E2A--