|
|
With the price of the W24EMR-C plugs going through the roof
(I bought in bulk for something like $1.40/plug before), it's
now basically just as economical or very nearly so, to go with
a better plug. Denso makes the IK-24 that is the Iridium
plug that would replace that plug. They also make other
heat ranges such as IK-27, IK-31, and IK-34, so if you're
using higher compression engines you may want to use a
different heat range.
At any rate, they seem to be very good plugs. I recently
switched to them and now have 60+ hours since the switch.
They should last about 5X the life, but I'll probably
replace them every 250 hours or so.
Tim
On 7/16/2012 7:12 AM, Greenbacks, UnLtd. wrote:
When my Lightspeed Engineering ignition was delivered, Denso W24EMR-C
plugs were included. They are gapped to .034 and I'm just wondering
if there might be a better choice of plug in this day and age.
Angier Ames N4ZQ
-- For archives and unsub
http://mail.lancaironline.net:81/lists/lml/List.html
|
|