|
|
Brad,
I bled my brakes from the bottom up using a plunger style oil can.
Watch for bubbles appearing in the reservoir. Keep at it until there
are no more bubbles.
Mark
ES
On 1/8/12, Brad jepp <brad4666k@yahoo.com> wrote:
Does anyone know the best way to bleed the brakes? I replaced the "O" rings
in the brake caliper because I had a slow drip. I was careful to remove the
line
from the caliper and then capped off the line while I had the caliper off. I
installed the caliper after replacing the "O" rings and then screwed on the
flexible line and had someone
inside apply pressure to the brake (like in a car) and loosened the bottom
bleeder valve until fluid ran out. brake is still spongy . Any help on this
would be great. Brad- LIV
|
|