If it is on it's gear you can get some wheel dollies from Harbor Freight for about fifty bucks and more it over the plywood at any angle you like.

http://www.harborfreight.com/catalogsearch/result?q=wheel+dollies

David

On 12:59 PM, Sky2high@aol.com wrote:

If you have about 10 feet, the Legacy stub wings should easily fit inside that width.  Just use a lot of help when you roll it from the back to the front yard.  You can even lay down some sheets of plywood for easy rolling of about eight feet forward at a time - then block the plane and move the rolled over sheets to the front for the next step in the move.

 

Grayhawk