Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Mon, 01 Aug 2011 12:30:58 -0400
Message-ID: <redirect-5070447@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=205.188.91.97; envelope-from=vtailjeff@aol.com
References: <list-5070037@logan.com>
In-Reply-To: <list-5070037@logan.com>
Mime-Version: 1.0 (iPad Mail 8C148)
Content-Type: text/plain;
	charset=us-ascii
Content-Transfer-Encoding: quoted-printable
From: vtailjeff@aol.com
Subject: Re: [LML] Re: Re-doing my panel
X-AOL-SCOLL-URL_COUNT: 0  
x-aol-sid: 3039ac1d33844e369c63749a
X-AOL-IP: 24.107.65.42

Brent Regan wrote a very good post a while back about why you should have a s=
team gauge backup. Consider static interference.

Jeff

Sent from my iPad

On Aug 1, 2011, at 7:06 AM, vtailjeff@aol.com wrote:

> Deco,
>=20
> I would recommend a backup.=20
>=20
> Jeff
>=20
> Sent from my iPad
>=20
> On Jul 31, 2011, at 11:07 AM, Dico Reijers <dico@internetworks.ca> wrote:
>=20
>> Hello,
>>=20
>> After a trip to OshKosh, I'm planning on re-doing the panel in my IV-P.  I=
'm wondering where the best place would be to get 2.25" airspeed, altimeter,=
 attitude indicator.  The instruments I have now have Lancair logos on them,=
 so I presume they shipped with the kit.  Does Lancair have the 2.25" instru=
ments as well.
>>=20
>> Also, if you were  redoing the panel with a Garmin G3X system (3 screens w=
ith battery backup), would you even bother putting in the 3 steam guages as b=
ackup or is 3 screens redundant enough?
>>=20
>> Finally, is there a market for the instruments/avionics I take out?  Perh=
aps Barnstormers....    stuff like vision microsystems engine monitor, sande=
l ehsi, steam guages, etc.
>>=20
>> Thanks folks!
>>=20
>> -Dico
>=20
> --
> For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.htm=
l