|
You should be able to find something
here;
|
|
| After two days of
skinned knuckles and scraped arms I have finally been able to remove the
flap motor/micro switch assembly from that tiny little space between the
seats of my 235. The system had failed in flight. The motor
powered screw drive has a ring of tine ball bearings which follow the
screw grooves and move the actuating arm which is attached to the flap
assembly. My ball bearing ring failed. I talked to Michelle at
Lancair and they have the item (later models use the same system) but they
are made in Sweden and cost a king's ransom. I'm writing this on the
outside (very outside) chance that someone might have one of these units
gathering dust on a shelf. If so, please send me a msg at
pathabu@aol.com. Pat
Halloran |
|