X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Mon, 12 Apr 2010 07:47:20 -0400 Message-ID: X-Original-Return-Path: Received: from mail30.bluewin.ch ([195.186.19.70] verified) by logan.com (CommuniGate Pro SMTP 5.3.5) with ESMTP id 4216522 for lml@lancaironline.net; Sat, 10 Apr 2010 02:43:09 -0400 Received-SPF: none receiver=logan.com; client-ip=195.186.19.70; envelope-from=patrick.hayoz@bluemail.ch X-Original-Return-Path: Received: from [195.186.19.84] ([195.186.19.84:37249] helo=tr18.bluewin.ch) by mail30.bluewin.ch (envelope-from ) (ecelerity 2.2.2.45 r()) with ESMTP id D3/16-12213-8DD10CB4; Sat, 10 Apr 2010 06:42:32 +0000 Received: from [192.168.1.61] (83.79.19.134) by tr18.bluewin.ch (The Blue Window 8.5.119.018.5.119.01) (authenticated as patrick.hayoz@bluemail.ch) id 4BB795C80029495E for lml@lancaironline.net; Sat, 10 Apr 2010 06:42:32 +0000 User-Agent: Microsoft-Entourage/12.23.0.091001 X-Original-Date: Sat, 10 Apr 2010 08:42:32 +0200 Subject: Re: [LML] Re: gear retract problems - 320 From: Patrick Hayoz X-Original-To: Lancair Mailing List X-Original-Message-ID: Thread-Topic: [LML] Re: gear retract problems - 320 Thread-Index: AcrYeP8JZTWpJj2l1kWswhaAe1ex2w== In-Reply-To: Mime-version: 1.0 Content-type: text/plain; charset="ISO-8859-1" Content-transfer-encoding: quoted-printable Angier, I have done (two wires and a momentary push switch) your mentioned suggestion a few years ago, to override the gear down pressure switch information (after analyzing, reading, reversing the famous spool valve, etc.). As you mention it, a push to the momentary (RED) switch starts the gear dow= n process. Works now for years without any problem. This solution is OK for me (one Aircraft with one pilot). A new pump or Wolfgang's solution would be better if there were different Pilots flying one Aircraft... Patrick Hayoz, LNC2 Am 09.04.10 22:53 schrieb "Greenbacks, UnLtd." unter : > So, would not the simple solution be to wire both sides of each > pressure switch to a momentary push button switch? > I have gages installed and so can observe the hi/lo pressures. A push > of the momentary switch should start the pump. >=20 > Angier Ames > N4ZQ > ...moving ever closer to first flight... >=20 > -- > For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.ht= ml ----------------------------------------------------------- Patrick Hayoz Chemin du stand 10 1789 Lugnorre =A0 Tel. : +41 26 673 09 90 Mobil: +41 79 546 62 81 e-Mail: patrick.hayoz@bluemail.ch