<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
> I was thinking, rather than "lowering" the light into the wingtip, build
up
> a flat
> surface with micro and release tape or foam and micro then bid.

I did basically what Ranny did and it worked out pretty well. I mounted
nutplates on a phenolic pad and hysoled it inside the wingtip. Be sure to
cut holes in the phenolic for the wires and plug to run through. I then
applied release tape to the light assembly and built up a micro pad to hold
the light a little out from the wingtip.

Bill Harrelson
N5ZQ

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>