Mailing List lml@lancaironline.net Message #47133
From: <vtailjeff@aol.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Lancair oil quick drain
Date: Sun, 04 May 2008 00:11:52 -0400
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
You need the low profile quick drain from Lancair. Do a gear retract test after installation to ensure the nose grear does not hit the quick drain in flight--draining all your oil. Minimal clearance on a IV/ / IVP.

Jeff


-----Original Message-----
From: Fred Moreno <fredmoreno@optusnet.com.au>
To: lml@lancaironline.net
Sent: Thu, 1 May 2008 9:57 pm
Subject: [LML] Lancair oil quick drain

Lancair lists a Continental quick drain (shown below) in their on line catalogue.  It looks like you remove a cap and screw on a hose which seems like it would make a mess.  I recall quick drains that contain valves – push the hose on, push the valve up to open, and drain with no mess.  Am I missing something here?  Recommendations?
 
Fred
 
Image
image001.jpg
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster