Ron: Could you
have installed the visors the other way around? It appears in your photo
that your mounting points are in the center of the windshield versus on the
outsides. Seems that side mounting points (far left and far right) like
in a car, would allow the visors to be swung to the sides to block the sun if
it were coming in directly from the left or right of the aircraft.
John
Hafen
-----Original
Message-----
From: Lancair
Mailing List [mailto:lml@lancaironline.net] On Behalf Of Ron Raby
Sent: Wednesday, January
02, 2008 1:55
PM
To: lml@lancaironline.net
Subject: [LML] sun
visors
I installed them in an ES. I used
1/4 " phenolic blocks same shape as the rosen mount. I drilled and tapped the
phenolic.
I then bonded the phenolic to the
plane with hysol.
My wife gave me a present of a set
of Rosen Sun Visors That are supposed to match the IV-P (according to Rosen
and supposedly Lancair). Lancair does not have a recommended installation
method. They have a 2 inch metal pad with three holes designed to directly
replace the Bonanza sun visors. Total weight about a pound
each
Has anyone put these into a IV-P?
If so what was the mounting method? Any experiences or issues to
offer?
You have been sent 1
picture.
000_0060.JPG
These pictures were sent with Picasa, from
Google.
Try it out here: http://picasa.google.com/