From: ByronMFox@aol.com
Message-ID: <71.a4e116.25c7b8dd@aol.com>
Date: Mon, 31 Jan 2000 23:19:41 EST
Subject: Flushing Hydraulic Lines
To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Yesterday, I removed the hydraulic pump from my LNC2 to be sent for overhaul 
by Oildyne.  The hydraulic fluid I drained from the reservoir was cloudy and 
contained what I assume to be fine aluminum silt.  The system is obviously 
badly contaminated.

While the pump is away, I would like to purge and clean the hydraulic lines.  
Has anyone in Lancair Land evolved an efficient means of doing so?  I would 
appreciate hearing from you.

Byron Fox
N3144C
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>