|
The problem here is that you'll need *every* bit of travel
and will have the trim fully to one end on landing... That is if you trim out
the stick forces as you land...Everyone that I've talked to and the Legacys that
I've flown all required full travel (and then some) to trim out the stick forces
on landing...
Alan
I seam to be missing something
with the Elevator Trim Tab. The Servo is producing much more travel than the
physical Trim Tab can deal with. The instructions call for the use of
the T2-10A Servo, with 1.0" of travel.
I believe a number of Legacy builders switched to
the T2-7A servo, which has 0.7" of travel.
Tom Gourley
|