Sender: <marv@lancaironline.net>
To: lml
Date: Sun, 22 Oct 2006 09:56:56 -0400
Message-ID: <redirect-1492850@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=68.142.229.97; envelope-from=lorn@dynacomm.ws
Mime-Version: 1.0 (Apple Message framework v752.3)
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Content-Transfer-Encoding: 7bit
From: Lorn H Olsen <lorn@dynacomm.ws>
Subject: Re: LNC2 Gear pressure switch adjustment

Bob,

I had my pressure switches adjusted when I purchased my plane in 1998  
and when I had my pump rebuilt and new switches put on in 2003. Why  
would you ever adjust the pressure after it is set correctly?

If you don't know if it is set correctly, Lancair sells pressure  
gauges for about $25. I installed one gauge for the high side and one  
for the low side under the passenger seat. Now, on the ground, I can  
verify that the pressures are correct.

Sincerely,
Lorn

> From: "BobL" <bobljude@charter.net>
>
> Its that time of year again when I need to adjust a pressure switch  
> on my LNC2.  Again, I have forgotten which way to turn the screws  
> (cw or ccw) to increase pressure.  If I guess wrong the first time  
> that means another test flight or put her on jacks for test.  But,  
> if one of you kind gentlemen will give me the answer, my work will  
> be reduced.  This time, I will make a note of it.
> Happy Landings,
> Bob Jude
> N65BJ
>
--
Lorn H. 'Feathers' Olsen, MAA, DynaComm, Corp.
248-345-0500, mailto:lorn@dynacomm.ws
LNC2, O-320-D1F, 1,200 hrs, N31161, Y47, SE Michigan