<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I used a kerosene heater which drew in fresh air and discharged warm
air into the shop area.  After several years (I'm a slooow builder), I
did notice
a 'greenish' tint in the areas that I had applied bid and safety-poxy.
Plus the
unprimed metal parts seemed to rust prematurely.  A light sanding
followed
by vacuuming and then the usual solvent wash before priming with PPG K-36
appears to work OK on the fiberglass.  Earl
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html