|
Ever since I installed my Tru-Trak, I've had interference
in the form of hash on my comm. I fould if I turned off my Garmin 196, which
feeds the TruTrak, the interference went away. When I grabbed the short
(6") Garmin output cable from the GPS to the four-pin connector on
the panel, that also stopped the interference. The leads from the connector
on the back side of the panel to the TruTrak and power were both shielded, but
the Garmin cable was not. I stripped some braid from another piece of cable, put
it over the Garmin cable, and grounded it at the connector. No more
interference!
|