<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>


TByrnes133@aol.com wrote:

> Brent
>
> Thanks for the reply.  I did not understand you when you said to install from
> center line outboard. I thought we were talking about the lines that go fore
> and aft from the gear box forward thru the tunnel under the spar to the switch
> quadrant.

Yes we are. Start in the middle and work to either side.

> Also I have had several suggestions to use 1/2 inch fuel
> lines from the wing fittings to the fuel selector.  What are your thoughts on
> this idea?

Probably a good idea, but it is more important to avoid machined 90 degree
fittings. If I had a choice between -6 tube with strait fittings and -8 with
90's, I'd take the -6. You can think of the system as a series of orifices, if
there is one choke point it doesn't really matter much what you do elsewhere.

Regards
Brent

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML homepage:   http://www.olsusa.com/Users/Mkaye/maillist.html