<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I used the pop rivets to attach the hinge to the wheel well, but countersunk
screws to attach the other half of the hinge to the door itself.  I also had
to use a flox filler between the pop-riveted half and the wheel well to keep
it straight enough to work.

I did NOT install a screw where it would interfere with the aluminum nose
wheel strap that goes around the tire.

By the way, I have an 80 mil (that's 0.080 inch) aluminum door.  I'm told
that's the way to go to prevent heat-induced warping.

- Rob Wolf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML homepage:   http://www.olsusa.com/Users/Mkaye/maillist.html