Return-Path: Received: from smtp13.bellglobal.com ([204.101.251.52]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Sat, 4 Sep 1999 10:43:35 -0400 Received: from default (Kingston-ppp64626.sympatico.ca [216.208.85.7]) by smtp13.bellglobal.com (8.8.5/8.8.5) with SMTP id KAA10707 for ; Sat, 4 Sep 1999 10:49:13 -0400 (EDT) Message-ID: <001e01bef6e4$d2503200$0755d0d8@default> From: "Ian B. Crowe" To: "Marvin Kaye" Subject: Re epoxy Date: Sat, 4 Sep 1999 10:50:24 -0400 Organization: Corvi Trade Consultants Inc X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> I have a fast build kit and have completed all structural work on wings including control surfaces, rudder and horizontal/vertical stabiliser, elevators, most of the internal structure in the cockpit area. I also have extended wing tips. I have body filled the areas I have completed but expect to have to go back over it at least once more. The canopy remains to start as does the forward deck. There will be no ready use tank up forward. I am on my second 5 gallon drum of epoxy and estimate I have used two gallons from it. I do not feel that there will be any left by the time this job is finished. Hope this helps. I think if you can do it with 7 gallons you will have done well. Regards Ian Crowe >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML homepage: http://www.olsusa.com/Users/Mkaye/maillist.html