Sender: "Marvin Kaye" <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Thu, 07 Apr 2005 16:35:02 -0400
Message-ID: <redirect-860941@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=12.36.98.200; envelope-from=bjburr@mwheli.com
From: "Bryan J. Burr" <bjburr@mwheli.com>
Subject: RE: [LML] Re: Finish door hinge area
MIME-Version: 1.0
Content-Type: text/plain;
	charset="US-ASCII"
Content-Transfer-Encoding: 7bit
In-Reply-To: <list-860569@logan.com>
Importance: Normal

My thought was that if I ever needed to remove the hinge I had much
worse problems that grinding out a little micro/flox mixture.  So, I
completely filled my hinge area leaving enough room for the door to
fully open without hitting the filler.  It finished off well and looks
nice.  I didn't do this until I was satisfied with the door fit in all
other areas.

Bryan
N132BB

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
Marvin Kaye
Sent: Thursday, April 07, 2005 11:31 AM
To: Lancair Mailing List
Subject: [LML] Re: Finish door hinge area


Posted for "Chatfield S. Daniel" <csdaniel@FNBSouth.com>:

  Good morning,
  
  I am body working the fuselage of my ES and I have a question for the
  group.  How are you finishing the door hinge area?  Specifically,
where
  the hinge attaches to the fuselage, do you fill this area with micro
or
  leave the top of the hinges exposed?  I can't imagine ever having to
  remove the hinge from the fuselage, so my first thought was to fill
the
  area.  What do you think?
  
  Chat Daniel
  RV-8 N678RV
  Super ES N891AC (reserved)
  
  
--
For archives and unsub http://mail.lancaironline.net/lists/lml/