Return-Path: <marv@lancaironline.net>
Sender: "Marvin Kaye" <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Wed, 30 Mar 2005 09:36:55 -0500
Message-ID: <redirect-829768@logan.com>
X-Original-Return-Path: <goconnell@dodo.com.au>
Received: from relay01.mail-hub.dodo.com.au ([203.220.32.149] verified)
  by logan.com (CommuniGate Pro SMTP 4.3c3)
  with ESMTP id 829595 for lml@lancaironline.net; Wed, 30 Mar 2005 05:19:32 -0500
Received-SPF: none
 receiver=logan.com; client-ip=203.220.32.149; envelope-from=goconnell@dodo.com.au
Received: from [10.2.3.72] (helo=DodoInternetWebmailServer)
	by relay01.mail-hub.dodo.com.au with smtp (Exim 3.36 #2)
	id 1DGaHd-0001Tz-00
	for lml@lancaironline.net; Wed, 30 Mar 2005 20:18:45 +1000
Received: from client 203.220.157.124 for UebiMiau2.7 (webmail client); Wed, 30 Mar 2005 20:18:45 +1000
X-Original-Date: Wed, 30 Mar 2005 20:18:45 +1000
From: "Gerard O Connell" <goconnell@dodo.com.au>
X-Original-To: lml@lancaironline.net
Reply-to: "Gerard O Connell" <goconnell@dodo.com.au>
Subject: nose gear door
X-Priority: 3
X-Mailer: Dodo Internet Webmail Server 
X-Original-IP: 203.220.157.124
Content-Transfer-Encoding: 8bit
X-MSMail-Priority: Medium
Importance: Medium
Content-Type: text/html; charset="iso-8859-1";
MIME-Version: 1.0
X-Original-Message-Id: <E1DGaHd-0001Tz-00@relay01.mail-hub.dodo.com.au>

<FONT face="Courier New">Scott, thank you for your response.I ha passed on
your sugestions to thelocal mechanics. Vern also feels it is most likely a
sequence valve issue. Replacing the valve seemed to temporarily correct the
problem but this was short lived. It has also been suggested by an
Australian builder that perhaps the nose wheel precesses slightly with
gyroscopic force during retraction and thus is at a slight angle different
to when on the ground and thus does not depress the valve. I don't have the
self centering nose wheel mod. The suggestion was to check the bearings for
wear + play in the nose wheel.&nbsp;On landing, I have noticed some "judder"
or shimmy during my roll out. This would be consistent with worn bearings
would it not? The judder was improved a little by a new drag link but has
far from<BR>disappeared altogether.</FONT><BR><BR>--<BR>Gerard O
Connell<BR>Melbourne, Australia<BR>VH-LPD (LNC2)<BR><BR><BR />
<BR
/>
________________________________________________<BR />
<BR />
Message
sent using Dodo Internet Webmail Server <BR />