Return-Path: <marv@lancaironline.net>
Received: from [65.33.162.219] (account marv@lancaironline.net)
  by logan.com (CommuniGate Pro WebUser 4.2.8)
  with HTTP id 652947 for lml@lancaironline.net; Mon, 31 Jan 2005 17:46:41 -0500
From: "Marvin Kaye" <marv@lancaironline.net>
Subject: Re: [LML] Re: Paint and primer
To: lml
X-Mailer: CommuniGate Pro WebUser Interface v.4.2.8
Date: Mon, 31 Jan 2005 17:46:41 -0500
Message-ID: <web-652947@logan.com>
In-Reply-To: <20050131222339.63862.qmail@web80310.mail.yahoo.com>
References: <20050131222339.63862.qmail@web80310.mail.yahoo.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"; format="flowed"
Content-Transfer-Encoding: 8bit

Posted for Scott Richardson <scott_m_richardson@sbcglobal.net>:

  Speaking of the WLS primer, I've got a couple places
  that have been primed but which I'd like to add a bit
  more filler to.  Are there any fillers that will stick
  to the WLS or do I need to take it down to the base
  glass and build it back up again?  Thanks.
  
  Scott
  

[As long as you properly prepared the surface before priming, I can't think of 
a reason why you couldn't scuff the surface of the primer, fill over it, do 
your sanding to contour, then reprime the newly filled area.  You probably 
stand the chance of doing more harm than good by trying to remove all the 
primer from an area without damaging the underlying skin.  If you mix your own 
filler using epoxy and micro and apply it to a properly prepared surface, 
you're going to get plenty of adhesion.  After you've finished priming that 
small area you'll probably need to go over the entire surface one last time 
with some Evercoat to take care of the inevitable pinholes and teeny minor 
depressions.

Sand and prime and sand and prime and sand and prime.... sooner or later you 
have to say enough is enough.  Otherwise it'll never be finished.  At least 
that's my take on things.....

  <Marv>              ]