Return-Path: Sender: "Marvin Kaye" To: lml@lancaironline.net Date: Mon, 20 Dec 2004 09:24:44 -0500 Message-ID: X-Original-Return-Path: Received: from www.dynacomm.ws ([198.22.63.66] verified) by logan.com (CommuniGate Pro SMTP 4.2.5) with ESMTP id 573915 for lml@lancaironline.net; Mon, 20 Dec 2004 08:21:25 -0500 Received-SPF: none receiver=logan.com; client-ip=198.22.63.66; envelope-from=lorn@dynacomm.ws Received: from [10.0.1.202] (adsl-69-209-136-196.dsl.sfldmi.ameritech.net [69.209.136.196]) by www.dynacomm.ws (8.10.2/8.10.2) with ESMTP id iBKDKfW03799; Mon, 20 Dec 2004 08:20:41 -0500 Mime-Version: 1.0 (Apple Message framework v619) Content-Type: text/plain; charset=US-ASCII; format=flowed X-Original-Message-Id: Content-Transfer-Encoding: 7bit X-Original-Cc: "Jerry Fisher" From: "Lorn H. Olsen" Subject: Re: 360 Hydraulic Pump X-Original-Date: Mon, 20 Dec 2004 08:20:35 -0500 X-Original-To: Lancair List X-Mailer: Apple Mail (2.619) > I am hoping that someone can help with a problem that I am having > firing up > the hydraulic pump. > . > . > Is there anything else I can try before sending it back to Lancair, > which > means I won't get it back until mid January if I am lucky? > . > . > Jerry Fisher Jerry, I sent my pump back to the Oildyne factory had new seals put in and had new high and low pressure switches (from Lancair) calibrated for the correct up and down pressures. The whole procedure took less than a week and cost $75.00. I wouldn't have this procedure done anywhere else. I highly recommend using Oildyne rather than Lancair for pump problems. Oildyne's contact information is listed below. Oildyne - Oil Dyne 5520 North Hwy 169 Minneapolis MN 55248 Contact: Edward Van Hecke Voice: 763-531-3578 -- Lorn H. 'Feathers' Olsen, MAA, DynaComm, Corp. 248-345-0500, mailto:lorn@dynacomm.ws LNC2, O-320-D1F, 1,000 hrs, N31161, Y47, SE Michigan