<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

Sounds like you're trying to match speaker outputs (8 ohm) to the aux audio
input on the panel.  Most CD decks have line outputs designed to go to those
massive bass amps the kids like to rattle windows with.  These are a
lower-level, higher-impedance signal that can go straight into your audio
panel input.  Only problem I've had (using a SONY deck and PS Engineering
audio panel) is that the gain in the audio panel is pretty low.  Apparently
there isn't much standardization of the peak-to-peak voltages on the line
outputs from CD decks.

Still, if you can use this method, it avoids having the extra parts and
wiring hanging somewhere behind the panel.

Jim Cameron,  LNCE  N82500

LML homepage:   http://www.olsusa.com/Users/Mkaye/maillist.html