Return-Path: Sender: (Rob Logan) To: lml@lancair.net Date: Thu, 19 Aug 2004 16:25:15 -0400 Message-ID: X-Original-Message-ID: <412506C3.4030807@Philips.com> X-Original-Date: Thu, 19 Aug 2004 16:00:03 -0400 From: Rob Logan Reply-To: Rob@Logan.com User-Agent: Mozilla Thunderbird 0.5 (X11/20040214) X-Accept-Language: en-us, en MIME-Version: 1.0 X-Original-To: lml@lancair.net Subject: LANCAIR 360MK-II CARBON KIT FOR SALE Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 8bit Posted for GLaznic@MCCUS.JNJ.com FOR SALE * * *LANCAIR 360MK-II CARBON KIT: *One of the latest kits produced by the factory, it’s of carbon-fiber construction (just like Legacy). Approximately 80 to 85% completed by professional mechanical engineer, with pride in workmanship. Regular EAA councilor inspections. Complete logbook and progress pictures. Build and stored in heated and A/C building. Total of over $72,000 invested up to date, all receipts are available. *AIRFRAME and work completed:* - Carbon Fiber Super-Fast-Build kit - Bottom fuselage in final prime - Landing gears, linkages and its actuators, all doors, and hinges - Wings closed with extended fuel tanks option - Header tank and forward deck with side hinge latches - All fuel tanks pressure tested to 1.6PSI, with fuel probes and low level sensors, strainers - Fuel transfer feature with el. pumps from tank to tank - Removable wing tips with lights and acrylic lens, one VOR antenna fitted - Ailerons with hinges fitted to wings, counter weights, el. trim - Horizontal stabilizer with elevator mounted, counter weight, travel stops, el. trim - Vertical stabilizer (left side) with all ribs and cap strips and COM antenna - Rudder completed with hinges, travel stops, all counter weights, el. trim, white tail light fairing - Flap’s bottom skin with hinges fitted to wings - Flap’s torque tube and actuator completed - Canopy’s hinges and pneumatic lifters with travel stops done and tested. - Canopy frame build with double (inside/outside) seal for weather proofing - Forward floors completed with hard point for rudders - Rudder pedals both sides fitted and rudder’s cable guides completed and tested - Control sticks and push rods completed and tested for ailerons and elevator - NACA fresh air scoops bonded both sides - Dual static ports installed _LANCAIR OPTIONS_: - Long engine mount and cowling - Forward hinge canopy - Adjustable rudder pedals with brakes, both sides - Out-Back landing gear with large 2 pcs doors - Hydraulically operated gear doors - Central canopy latch system - TK-5 Shocks - Long tail – horizontal stabilizer and elevator - Static discharge kit _ACCESSORIES_: - Navigation and strobe lights - Custom power quadrant, three levers style with switch - Infinity control sticks with switches and toggles - Andyair fuel selector valve system “LEFT-RIGHT-OFF” - Fuel filter - Hydraulic filter - Heated pitot tube - Fire wall nose-wheel slot’s cover - Interior HVAC valve - Trim servo kits and indicators - Custom jacks and rear hard point - Facet fuel transfer pumps 2pcs. - Other: e-glass & carbon cloth, hardware kit, cutting tools, epoxy, glows, brushes, MC, etc. _INSTRUMENTS_: - AOA kit and instrument (Professional) Proprietary Software, Co. - Speed indicator instrument with Lancair logo - S.I.R.S. Compass - J.P.I. - FS-450 fuel computer, instrument and sensor - J.P.I - EGT/EGT instrument with all sensors + 2 spare PRICE: $31,900 *ENGINE:* Factory new 180H.P Lycoming IO360-B1F, 0 time. This engine is fully pickled with removed accessories, opening closed and interiors flooded with 41 QRT of oil w/ original factory crate and box _ACCESSORIES & OPTIONS_: - Standard injectors - GAMI injectors - Electric fuel boost pump (high pressure) - Alternator kit 12V/60A - S.S. exhaust kit with heat exchanger - Hoses - Baffling kit - Andyair Fuel-Oil separator with condensation trap - Engine stand on casters PRICE: $21,900 *PROPELER:* Factory new, constant speed Aero-Composite 2 blade 70” prop. 0 time still in its original crate - Spinner and back plate, balanced and pre-fitted to prop with internal ribs and scribes, pre-drilled to match the back plate - New Hydraulic Prop. Governor (McL.) PRICE: $8,900 *OTHER items offered for sale:* - Rotisserie stand for air frame - Work benches 2 pcs - Shelf - Band saw - Drill press - Grinder/sander - Remote “Hobby” fresh air system with 2 masks - Air compressor 5H.P. with tools and hoses - Paint spray system (professional) - Dust collection-vacuum system with hoses - Engine crane on casters - 6H.P. vacuum “Craftsman” - Pipe bending tool kit - Pipe cutting & flaring tools - Epoxy pump PRICE: Serious inquiries, please contact Garry Laznicka at W (215) 273-8343 or H (610) 872-1272. Kit is located in Philadelphia, PA. GLaznic@MCCUS.JNJ.com