Mailing List lml@lancaironline.net Message #23096
From: Skip Slater <skipslater@earthlink.net>
Sender: Marvin Kaye <marv@lancaironline.net>
Subject: Re: [LML] IV/ES baggage door gas strut
Date: Thu, 18 Mar 2004 23:15:27 -0500
To: <lml@lancaironline.net>
Skip,
   Here's the strut on my door.  I also got mine from McMaster Carr.  You
can see their online catalog at www.mcmaster.com .
   My strut is called a gas spring with threaded ends and it's on the lower
part of page 1061 in the online catalog.  The part number is 9417K11.  It
comes in several different extension forces.  I tried 20 lb initially and
just switched to 30, as the original one was sagging a bit.  I used a clevis
fitting on one end and a ball and socket on the end that attaches to my door
hinge.  I drilled a hole in the hinge and tapped it for the ball.  The end
fittings are on page 1063 and 1064 of the catalog.
   Be advised that if you use a strut, you'll need to stiffen your baggage
door or it will bow out from the force of the compressed strut..  I used a
few bid of carbon to stiffen mine.
   Skip Slater
   N540ES
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster