Return-Path: Sender: (Marvin Kaye) To: lml@lancaironline.net Date: Mon, 09 Feb 2004 16:34:05 -0500 Message-ID: X-Original-Return-Path: Received: from imo-r03.mx.aol.com ([152.163.225.99] verified) by logan.com (CommuniGate Pro SMTP 4.1.8) with ESMTP id 2984593 for lml@lancaironline.net; Mon, 09 Feb 2004 16:19:40 -0500 Received: from JIMRHER@aol.com by imo-r03.mx.aol.com (mail_out_v36_r4.12.) id q.17f.25dac564 (4410) for ; Mon, 9 Feb 2004 16:19:19 -0500 (EST) From: JIMRHER@aol.com X-Original-Message-ID: <17f.25dac564.2d595356@aol.com> X-Original-Date: Mon, 9 Feb 2004 16:19:18 EST Subject: Rudder Control for IV-P X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_17f.25dac564.2d595356_boundary" X-Mailer: 8.0 for Windows sub 6800 --part1_17f.25dac564.2d595356_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Sure Giff, I used the Factory offered internal Rudder system. I just looked at there Website and I couldn't find it but it use to be $385.00. It attaches to the cables inside the rear tail and coverts to push/pull rods that have a shorter leverage so the push rods stay within the width of the rudder leading edge. I heard they were designed and made for the factory by Bob Wolsterholme if you need to run it down. Mine has worked perfect and provides a place to attach the Autopilot Yaw servo. Jim Hergert N6XE, "An Sex Y" L4P Does anyone know if there is an internal rudder control instead of the control cable from the fuselage to the rudder arms. Giff Marr IV-P/20B 8% --part1_17f.25dac564.2d595356_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Sure Giff,
I used the Factory offered internal Rudder system. I just looked at there We= bsite and I couldn't find it but it use to be $385.00. It attaches to the ca= bles inside the rear tail and coverts to push/pull rods that have a shorter=20= leverage so the push rods stay within the width of the rudder leading edge.=20= I heard they were designed and made for the factory by Bob Wolsterholme if y= ou need to run it down. Mine has worked perfect and provides a place to atta= ch the Autopilot Yaw servo.
Jim Hergert
N6XE, "An Sex Y" L4P





Does anyone know if there is an internal rudder control instead of the
control cable from the fuselage to the rudder arms.

Giff Marr
IV-P/20B 8%







 --part1_17f.25dac564.2d595356_boundary--