|
|
I was going to suggest two 12 volt bulbs in series also. I am running at12 volts so I don't have that problem. There are tons of halogen bulbs outthere at 12 volts. As far as loss of redundancy the only reason you have two is to solve a problem. Are two bulbs less reliable than one. Well yes slightly but my experence with landing lights has been only fair no mater what the voltage.
Two bulbs are a good, easy and inexpensive solution in my opinion.
Ray
In a message dated 2/5/04 6:10:19 PM Central Standard Time, marv@lancaironline.net writes:
Posted for <autumn12@alltel.net>:
The only problem with hooking them up in series is if you burn out one lamp
then you loose them both. There goes your redundancy. Not a good move.
Jack Plavcan
N235U
>I solved the 24 volt landing light problem with two 12 volt lights in series.
|
|