<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Dan wrote about 'how many pounds' to use when closing out the wings etc.

I would like to warn those that during this process that every effort is
made not to concentrate whatever weight is used in any area not fully
support by ribs, spars etc.

I unfortunately found I had to fill several areas during the
primer/painting stage that were 'over' pressed just slightly.  This
wasn't apparent until the long sanding board was used.  I don't know how
much weight I used but it was too much in unsupported areas.  Perhaps a
long straight board well placed under the weights  may have prevented
this.   Earl