Return-Path: Sender: (Marvin Kaye) To: lml Date: Wed, 02 Jul 2003 09:52:45 -0400 Message-ID: X-Original-Return-Path: Received: from imo-d06.mx.aol.com ([205.188.157.38] verified) by logan.com (CommuniGate Pro SMTP 4.1b8) with ESMTP id 2454302 for lml@lancaironline.net; Wed, 02 Jul 2003 09:28:59 -0400 Received: from RYoung03A@aol.com by imo-d06.mx.aol.com (mail_out_v36_r1.1.) id q.21.319ff413 (3980) for ; Wed, 2 Jul 2003 09:28:51 -0400 (EDT) From: RYoung03A@aol.com X-Original-Message-ID: <21.319ff413.2c343813@aol.com> X-Original-Date: Wed, 2 Jul 2003 09:28:51 EDT Subject: Re: [LML] LIV-Nose Gear Doors X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_21.319ff413.2c343813_boundary" X-Mailer: 8.0 for Windows sub 6011 --part1_21.319ff413.2c343813_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Barry, I would suggest that you put microswitches on each door to show on your annunciator panel that they are opening and closing properly. I suggest the same for the main gear doors. Otherwise, installation of the doors per the book worked out ok for me. Just watch the tabs when you do the retract tests to make sure they are not hanging up on the opposite door. Bob Young LNC4 --part1_21.319ff413.2c343813_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Barry, I would suggest that you put microswitches on e= ach door to show on your annunciator panel that they are opening and closing= properly. I suggest the same for the main gear doors. Otherwise= , installation of the doors per the book worked out ok for me. Just wa= tch the tabs when you do the retract tests to make sure they are not hanging= up on the opposite door. Bob Young LNC4 --part1_21.319ff413.2c343813_boundary--