|
|
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
<< Lancair Builders' Mail List >>
<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
You can supply power and ground to the probes. If you use and oscilloscope
you will see a square wave output. Now using capacitors between the center
conductor and the outside of the probe you will see a change in the
frequency of the square wave output. For most applications you will need to
convert the pulses to a voltage or current. There are many good digital to
analog converters available for this purpose.
Adam Molny wrote: Does anybody know how the Vision Microsystems fuel probes are wired
internally? I would like to bench test them without the indicator gauge,
<SNIP>
LML website: http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore: http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.
Please send your photos and drawings to marvkaye@olsusa.com.
|
|