Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5.2) with ESMTP id 1033698 for rob@logan.com; Wed, 30 Jan 2002 20:12:09 -0500 Received: from lsmls01.we.mediaone.net ([24.130.1.20]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with ESMTP id com for ; Wed, 30 Jan 2002 17:46:52 -0500 Received: from l2k (we-24-127-104-243.we.mediaone.net [24.127.104.243]) by lsmls01.we.mediaone.net (8.11.4/8.11.3) with SMTP id g0UMlBf10058 for ; Wed, 30 Jan 2002 14:47:11 -0800 (PST) From: "R. Dan Ribb" To: Subject: RE: Releasing Gear Doors - Legacy Date: Wed, 30 Jan 2002 14:49:15 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Importance: Normal In-Reply-To: <001c01c1a98c$a1950ca0$08094ed8@dgwest> X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Dana - One more option to confuse you :~) Jim and I are building 2 Legacy's here together and decided to try doing the release on the doors themselves - leaving the nice clean factory "joggle" on the center section alone. Jim, has done his already and it worked very well. It seems SO much simpler than the procedure in the manual. Besides, you are already trimming and doing lay-ups on those doors anyway. Also, on the long skinny outer doors it thickens the edges a bit and helps deal with the sharp edge along the back side. His fuselage is in the "rotisserie" and mine is in the alignment jig. I'll get to my doors when we swap positions and I will definitely use this method of releasing the doors and not the fuselage/center section. .. Dan .. L2K @ 25% http://www.eaa376.com/l2k/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://members.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please remember that purchases from the Builders' Bookstore assist with the management of the LML. Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>