<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

Peter Barber --  I had the same trouble with the the distance between
the servo motor arm and the tab hinge arm being too short to use the MAC
clevis ends. I discarded them and made an aluminum link between the two
points. It looks much better than the clevis but has the disadvantage of
not having a length adjustment. I set the length by putting the tab in
trail at the midpoint of the servo travel.
   This was not an original idea of mine; I saw the method used on
Chris Zavatson's 360 and followed his lead. I have a photo if you are
interested.        Charles Keller

LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.