|
|
Ed, the oil return on my engine is a banjo fitting under the old oil filter
mount and I don't see how I can adapt it. I can use one mm/AN for the oil
exit. The oil cooler also comes with built in banjo fittings and the remote
oil filter has 1/2" NPT ports. I see lots of trips to the hydraulic supply
store in my future :)
Bulent
On 7/15/04 5:32 PM, "Ed Anderson" <eanderson@carolina.rr.com> wrote:
Bulent, I used AN-10 hose and fittings. I have mm/An adapters screwed into
the block for oil exit and entrance and then built my own hose using the
external stainless steel line. I use it for gasoline, oil and coolant but
will admit that it just bit overkill for the coolant and would go with
something different if doing it again such as top quality radiator hose.
Never a leak (so far)
Ed
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
|
|