|
|
Bulent, I tried faxing to you on that number and a lady briefly answered the
phone. This was at 0600 so I may have been a bit early and you may not have
had your phone set up for fax. Just want to verify that is a fax number you
gave me.
Ed
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message ----- From: "Bulent Aliev" <atlasyts@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, July 08, 2004 10:25 PM
Subject: [FlyRotary] Re: LS1 Coils and Harness II
Ed, I could use one too. My fax is: 954 946-2932
Thanks.
Bulent
On 7/8/04 10:14 PM, "Ron Milligan" <ronmilligan@cox.net> wrote:
> Thanks for the offer. Someone else emailed me the schematic. I figured
it
> was included with Tracys instructions. Once again email lists to the
> rescue.
>
> Ron Milligan
> RV7 QB Fuse
>
> -----Original Message-----
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
> Behalf Of Ed Anderson
> Sent: Thursday, July 08, 2004 5:29 PM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] Re: LS1 Coils and Harness II
>
>
> Not to worry, Ron.
>
> Tracy does have an LS1 coil wiring diagram. Its not difficult at all
> and I am certain that if you sent him a SASE envelop he would be happy
to
> mail you a copy. The EC2 for the LS1 is slightly different than that
for
> the Mazda stock coils, so they are not directly interchangeable. So,
make
> certain when you order your EC2 that you specify it is for LS1 coils.
>
> Do you have a fax number? I could try an fax you the sheet that has the
LS1
> wiring diagram or you can get it from Tracy.
>
> Ed
>
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|