To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Message-Id: <AA-012386768340BEC9F7AA66DC872A8EAD-ZZ@rome1.prodigy.net>
Date: Fri, 04 Jun 2004 09:18:40 -0500
From: DELTAFLYER@prodigy.net
Subject: Re: [FlyRotary] Re: Ivo prop

Am I the only one who can not open Bulent's 
attachments?
I am using Internet Explorer and it does not know how 
to open this attachment.
Is this a PC/Mac thing?
Thanks,
Jim
--- Original Message ---
From: Bulent Aliev <atlasyts@bellsouth.net>
To: "Rotary motors in aircraft" 
<flyrotary@lancaironline.net>
Subject: [FlyRotary] Re: Ivo prop

>On 6/3/04 9:16 PM, "sqpilot@earthlink" 
<sqpilot@earthlink.net> wrote:
>
>> =20
>>> =20
>>> ----- Original Message -----
>>> =20
>>> From:  Bulent  Aliev 
<mailto:atlasyts@bellsouth.net>
>>> =20
>>> To: Rotary motors in aircraft 
<mailto:flyrotary@lancaironline.net>
>>> =20
>>> Sent: Wednesday, June 02, 2004 9:06  PM
>>> =20
>>> Subject: [FlyRotary] Ivo prop
>>> =20
>>>=20
>>> =20
>>> Steve, here is a photo  of the angle of attack 
close to the hub on the p=
>rop
>>> that Perry Mick designed  for me. Compare that to 
the Ivo.
>>> Bulent
>>> =20
>>> Hi, Bulent....I was  looking at the picture of the 
prop (nice) that you =
>sent,
>>> and I couldn't help  but notice the PSRU.  It 
looks like Tracy's, but th=
>e
>>> cast aluminum (?)  housing does not look like 
his....It looks more like =
>the
>>> Ross.  I like  that.  More info please?   Thanks 
for your reply.  Paul
>>> Conner
>> =20
>> Paul, my engine=B9s starter is the same as the 20B, 
tucked under the spark
>> plugs. It mounts to the bellhousing and the engine 
block. That=B9s why I us=
>ed
>> the bellhousing and made adapter plate to fit 
Tracy=B9s gear box. That move=
>d the
>> gear box about 3=B2 further than Tracy=B9s standard 
plate. The problemis that=
> Trcy
>> had to make a longer drive shaft.
>> Bulent
>